HPS-30, 50 PLASMA STERILIZERS

30, 50 liters tabletop sterilizer

: Small and medium-sized general hospital, surgical instruments can be sterilized long length

▶ Feature
  - Easy to use

      You can start/cancel/control the sterilization process by simply pushing key buttons. The selected sterilization

      cycle will be progressed automatically and you can monitor relevant information such as sterilization conditions,

      progress status, error messages from the display.

  - Automatic notification system for regular maintenance

     Your HPS series sterilizer will automatically notify you the replacement period of consumables such as pump oil,

     air filter and so on. After 250 cycles of sterilization, a warning message to change oil will be displayed and your

     sterilizer will stop working when reaches 300 cycles without change of oil to prevent equipment failure. 

  - Complete eradication of bacteria

      HPS－50 maximized safety and reliability regarding to sterilization using high efficiency
      microwave plasma sterilization technique which spread sterilizing factors equally within the chamber

  - Self Test Features

      When malfunction occurs during operation, an error code is displayed by self-test features and the running

      sterilization cycle is interrupted automatically for safety.

  - Validation of Sterilization of HPS－50

      A PCD(Process Challenge Device) in accordance with EU standards(EN 867-5) is used for the validation of

      sterilization of a dead-end lumen at the most difficult positions inside of the sterilization load.