Global Medical Directory is part of the Informa Markets Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Connect with this vendor - Learn about this product

TABLE TOP STEAM STERILIZER 23 LTR

Model No : AUTT 501

Type : Table Top Autoclave

Specification :

It has features for both pre & post vacuum.

This autoclave is made of complete stainless steel 304 Grade having outer & inner wall & has capacity of 23 liters chamber which has compact outer dimensions. 

There is mineral wool insulation between the two walls .

Table Top Autoclave is designed to sterilize class B cycles. 

This Sterilization unit is used in dental and private clinics that need to sterilize narrow and hollow instruments and wrapped packs. 

It has 2 No. stainless steel perforated shelves. 

The water reservoir has capacity of 6 liters of distilled or low quality deionized water. 

This sterilizer are designed to perform class B cycle that meet the strictest EN 13060 European standards.

Pre Vacuum Air Removal feature is a part of Table Top Steam Sterilizer. Air is trapped inside these instruments and fabrics, resulting in air pockets that prevent the full penetration of steam. It is known that spores and bacteria can survive at 134 Deg.C in air pockets.  Therefore, pre vacuum air removal eliminates air pockets from all load types and maximizes steam penetration to instrument components.

Post Vacuum Drying feature is a part of Table Top Steam Sterilizer.When hot steam comes in contact with the cooler instruments, condensation can form. Condensation becomes even more serious with packaged loads, when moisture can remain after the cycle ends. A moist load does not provide sufficient SAL (Sterility Assurance Level). Post vacuum drying provides complete drying of porous loads and hollow instruments at the end of the sterilization process.

Temperature is controlled by Microprocessed PID Controller which will have following features:

Auto purging: Set Temp.

Purging Stop: - Set Temp.

Auto Exhaust:- Cool

Elapse Time

Set Temperature:- Can be set as desired

Facility for temp. Control

Auto cycle stop

Buzzer at cycle over

Operating Temp. 121 Deg.C to 135 Deg.C

Sterilizing Pressure 1.2 to 2.3 kg /Cm2

Pressure can be achieved upto 760mm/ hg approx.

This sterilizer work on 200/ 220 volts A.C 50 Hz.

Model No     Size in inch      Size in mm      Capacity (Ltr)

AUTT 501     10 x 18 Inch     250 x 450 mm        23 Ltr