CWM-303 Anesthesia workstation
Integrated Breathing Circuit with latest anesthesia clinical design
Large volume of CO2 tourill.
Resistant to 134 degree temperature
Low essential resistance, good mechanical compliance.
Replacing drive bellow is not necessary when operating pediatric anesthesia.
Integrated breathing circuit with APL valve, good stopping property and easy to use.
Heated breathing circuit ensure no water trap in the system internal inspiration and aspiration flow sensor.
High-precision Vaporizer
Apply with Selectatec.
Pouring type/ quick-fil.
Isoflurane, Enflurane, Halothane, Sevoflurane.
Integrated Can be used for large flow anesthesia(up to 15L/Min)
Apply automatic compensation function for temperature, pressure and flow.
Replacing drive bellow is not necessary when operating pediatric anesthesia.
Display
NEW interface design with a good layout and colour assortment.
Real-time detection for circle graph, airway pressure, flow rate, volume, compliance and air resistance.
Day/Night display mode brings a better visual perception to users. Night mode suitable for dark environment.
15 inch touchable screen with no dead space in the screen which give users a clearly vision for parameters and waveforms.
To display a full range of ventilation modes include VCV, PCV,SIMV-VC,SIMV-PC,PSV. Also displays pressure, flow speed, volume and CO2 waveform in same screen.
ACGO
International standard design.
To connect with T circuit or bain circuit for open-operation.
Convenient for patients’ oxygen inhalation and postoperative recovery.
AGSS
Made by aluminum alloy. High strength, light weight, never rusts.
To enhance the safety of the environment in which members of staff in close proximity with waste anaesthetic gases and vapors (agents) work.
Yoke system
To allow back-up cylinder.
3 gas sources support: O2, N2O, Air
Normally 11L csize in the emergency case
Monitoring
Comprehensive monitoring capabilities include ventilation parameters monitoring, preset parameters, alarm indication and breathing waveform
monitoring.
Plug in design
Plug in design available for monitoring SPO2, CO2, FiO2 and 5 types of anesthetic gases.